Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 11/20/2023
Pro Control App and Windows ASIO Driver-
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11
Tone Master Pro Firmware Update
Desktop Pro Control App update
Significant improvement of touch screen response – larger touch zones
Setlist View interface and performance improvements
Flanger Mod Rate now responds to TAP Tempo
Reverse delay volume drop
FX Loop 2 now loads in enabled state
Latency improvements for parallel signal path types
Reduced Round Fuzz Germanium gain
Spillover now on for all reverb effects by default
FX Loop 3 and 4 audition audio loads correctly
Aux In now muted when disconnected to alleviate potential noise
Loading a preset with the Jubilee amp no longer causes audio to ramp up
Last used preset now loads when powering unit up
Global tempo now saved after restart
Midi Clock Bug fixes
Changing mic on standalone cab returns to cab selection screen instead of cab edit screen
Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.
Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!
The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.